Lexia & PP2000 updates (DiagBox v8.47)

[Simple]

The software provided and the procedures proposed are intended for personal, educational and experimental use to install DiagBox 8.xx related updates. I hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.

Links are provided in the attachments for 3 compilations "APP_Update_817-837.EXE", "APP_Update_835-838.EXE"و "APP_Update_838-842.exe", "APP_Update_842-846.exe" and "APP_Update_846-847.rar". Those executables are intended to update Lexia and PP2000 components of DiagBox from versions 8.17+ or 8.35 respectively, to the latest 8.42 and will bring Lexia v500.74 and PP2000 v600.80 to latest fixes or support level.

APP_Update_817-837.EXE update should be attempted if you have a working DiagBox v8.17 / v7.81 installation or higher, or if you have a working "APP-835.7z" implementation.

APP_Update_835-838.EXE update should be attempted if you have updated to 8.37 or a working "APP-835.7z" implementation. Update APP_Update_838-842.exe can then be installed.

Procedure:
1- Ensure you have a backup copy of the file "C:\AWRoot\bin\fi\APPDIAG.SYS" before you start.
2- Download and execute the appropriate file for your own setup. The process will copy all necessary files to the updt folder, it will then automatically kill all associated processes to enable overwriting without conflicts.
3- Run DiagBox to start the update process and wait until DiagBox is operational. Close DiagBox and restart your computer to ensure all processes are running.

Done..! you may run DiagBox as usual.. Notice that DiagBox version will NOT be changed by these updates..

Have fun!

Lexia language is set to English and PP2000 to french, if you wish to change them, edit the DICO.TXT file in the EXE folders of LEXIA or OUTILREP (PP2000) and replace "GB" with "FR" or vise versa.

P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.

If you wish to change Lexia and PP2000 language, edit the DICO.TXT file in the EXE folders of LEXIA or OUTILREP (PP2000) and replace "GB" with "FR" or vise versa. For a more detailed process and other languages, review this link:

http://www.lesamisdudiag.com/diagbox/83513-diagbox-7-77-8-13-update-francais.html

DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.

Regards, Simple.

[mikey59]

Hello Simple, there is not the new 3008?

Regards

[Simple]

Regrettably, this update addresses Lexia and PP2000 modules of DiagBox.. I don't have an access to a full working DiagBox system (like the dealers) that I could borrow some files to compile the whole release.

Add to the above that not only my car is old, but at my age I cannot put the time I used to enjoy years back. May be it is time we saw other users cooperate to fixing this issue.

Whilst I don't personally benefit from these releases, I hope you ALL do..

Simple.

[Warlord]

Salut,
L'installation de ses mises à jour s'éffectuent comment ? Parce que celà n'a rien à voir avec le début jusqu'à la 8.17 tout s'est bien déroulé et là en procédant de la meme manière j'ai du flingué l'installation....

[ballajunior]

Hi Simple,

long time ;-)

Check it out... Francais OBD2: Download Diagbox V8.42 8.38 8.37 8.35 8.17 Update Software

Seems that they are good for copy-paste...
Cheers

[Simple]

Hi ballajunior and nice to hear from you again..

Well, I posted my work in good faith for none commercial users, and I will keep doing that as long as I can.

I will PM you Lexia and PP2000 update 8.50-8.54. You can try it and if all is well, post it yourself.

Thank you for the info and stay active.

Simple.

[ballajunior]

Hi Simple,
well, at work, we shifted from Peugeot to mostly Renault vehicles. Before that, I could manage to install few computers with Diagbox v7.83 and my co-workers around the continent are, so far, quite happy with their tool. After that, I switched to Renault Clip, which is far more "Simple" to install and to keep up-to-date ;-) That's why I'm following your nice work "quietly", unless I find stolen work/ideas/solutions by unscrupulous companies or users... In this case, it's a chinese company, selling Peugeot clone interface, but using your work for business... In my believe, they should be the one working hard on "software", in order to continue to sell their hardwares (chinese clones).

During my mission break (first quarter 2018), I will make up for lost time on that specific topic (Diagbox) and keep you posted. In the meantime, I'm sure you will get us more updates ;-)

Stay well Simple and thanks again for your work!
Cheers

[sebbah.be]

Merci beaucoup^.

[toinee]

merci simple on a les mise a jour suivante de disponible ??

je suis a v7.855